Sabtu, 29 November 2014

Resolv proxychains configuration not in directory /etc/proxychains.conf #Slackware

hello, i want share install proxychains on slackware.
before to step, do you know proxychains? i mean proxychains is a tools chain of proxy to takeover for secure browser etc.
this problem, configuration proxychains not in directory /etc/ then where this config?:D
for solve this trouble, edit file .slackbuilds and add parameter like this:
make
make install DESTDIR=$PKG
make install-config DESTDIR=$PKG

after parameter file make, make install DESTDIR=$PKG
copy paste this parameter to your file slackbuild, i marked in bold and rebuild on your slackware machine, may helpful
thank's

source: http://www.linuxquestions.org/questions/slackware-14/how-to-configure-proxychains-slackware-14-0-a-4175486903/

change MAC Address to other MAC Address(hide mac address) #Slackware

hello bloggers, i want share tutorial about mac address.
in the world of hacking, you must learn mac address it's just learn not to be crime
okay now you install(if you not use pentest OS), as example i use slackware for try
okay follow this step
if you haven't this tools, you can download tools for slackware in here
after installed, now open your konsole(kde) terminal(gnome) adjust to your DE.
1. disable your device, like wlan0 or eth0
#ifconfig wlan0 down (for example)


2. and change mac, e.g i use random for this mac if you want more setting you mac type --help on command
#macchanger -r wlan0


3. after change, enable your device again
#ifconfig wlan0 up (for example)



thank's may useful
note: don't use for crime, i'm not responsible if used in crime it's just for learn to security networking.

Sabtu, 15 November 2014

Repair flashdisk can't format "windows unable to format"

hmm hello blogger's :)
i'm tell a little story, this laptop my friend can't format this flashdisk on her laptop and he use windows operating system
this issue, show notif "windows unable to format", i'm try to exploration with CMD on windows ;)
previously, i try hp usb format tools can't resolve so i use CMD on this windows
okay, plug usb flashdisk on your laptop/PC
see follow this step
1. and then run CMD as run administrator
2. type DISKPART on your CMD
3. after type, see your volume/disk your flashdisk e.g my volume there on 4 like this:

4. and select volume
5. next clean your volume with command "clean" without the quotes
6. after clean create partition, with command "create partition primary"
7. after create format this flashdisk with "format recommended", wait until completed
8. and then execute "active" on CMD, so active this flashdisk and finish
like this:

thanks, may helpfull ;)
CMIIW

Install Kali Linux (1.0.9 version)

morning all, i want share how to installing kali linux
i'm sorry if who last once, but if can't once follow this step
okay now i give video, for install kali linux
if describe has too long man ;)
let's see it:

may usefull ;)

Senin, 10 November 2014

Fix "not starting portmapper and pulse audio configured per-user sessions" on Kali Linux

night all, i have some tutorial to solve problem on kali linux :)
this is little problem :D, actually this problem has long :)
okay, now follow this step:
1. solve problem audio
open your terminal, and then execute:
#nano /etc/default/pulseaudio
and then find and change "PULSEAUDIO_SYSTEM_START=0" to "PULSEAUDIO_SYSTEM_START=1"
save and exit

2. solve problem portmapper not running:
open your terminal, and then execute:
#update-rc.d rpcbind defaults && update-rc.d rpcbind enable
and then reboot your system

thank's may helpfull :)

Sabtu, 08 November 2014

Basic Setting MikroTik

Night all, i want define setting MikroTik basic yet.
because i'm newbie, if there wrong or idea comment me on post comment share it's fun ;)
okay now follow this step:
1. First Open your winbox and turn on MikroTik Router.
if you don't have MikroTik Router you can try pre-postthere
2. and then login with winbox to MikroTik, like this:
and watch this video

Sabtu, 01 November 2014

Crack Proteus 8 pro, Nitro Pro 9, winrar 5.11

if you need crack on here:
# But i recommend you buy licensi if you have enough money
proteus crack 8 professional
Proteus 8 Crack
winrar 5.11 crack
Winrar Crack
Nitro Pro 9
Nitro Pro Crack
alternatif links:
Crack Proteus 8 pro
Crack Winrar 5.11
Crack Nitro pro 9

Tentang Proteus

sore bloggers, kali ini saya akan sharing membahas tentang proteus.
proteus adalah sebuah software simulasi yang sekaligus untuk mendesain rangkaian dan PCB. Proteus mengkombinasikan program ISIS untuk membuat skematik desain rangkaian dengan program ARES untuk membuat layout PCB dari skematik yang kita buat. menurut pendapat saya proteus ini seringkali digunakan sebagai praktikum digital system seperti membuat rangkaian gerbang logika dan menurut beberapapa pendapat di forum - forum, software ini bagus untuk digunakan untuk desain rangkaian mikrokrontoller. serta menurut sumbernya proteus juga baik untuk belajar elektronika seperti dasar dasar elektronika sampai pada aplikasi mikrokontroller. mungkin hanya segitu ulasan dari saya, jika ada kekurangan tolong beri saran di comment ya.
thanks :)
beberapa fitur - fitur proteus yang saya baca dari summbernya:
- memiliki kemampuan untuk mensimulasikan hasil rancangan baik digital maupun analog maupun gabungan keduanya
- mendukung simulasi yang menarik dan simulasi secara grafis
- mendukung simulasi berbagai jenis mikrokontroller seperti AVR, PIC, 8051 series dan mikrokontroller lainnya.
- memiliki model - model peripheral yang interactive seperti LED, tampilan LCD, RS232 dan berbagai jenis library lainnya.
- mendukung intrument - instrument virtual seperti volumeter, ammeter, oscciloscope, logic analyser, dll.
- memiliki kemampuan menampilkan berbagi jenis analisis secara grafis seperti transient, frekuensi, noise, distorsi, AC dan DC dan lain - lain.
- mendukung berbagai jenis kompone - komponen analog.
- mendukung open architecture sehingga kita bisa memasukan program seperti C++ untuk keperluan simulasi
- mendukung pembuatan PCB yang di-update secara langsung dari program ISIS ke program pembuat PCB-ARES

PENGENALAN ISIS
ISIS dipergunakan untuk keperluan pendidikan dan perancangan. beberapa fitur umum dari ISIS adalah sebgai berikut:
1. Dapat dioperasikan pada Windows 98/Me/2k/XP/Vista/7/8 dan mungkin hingga Windows 10.
2. Routing secara otomatis dan memiliki fasilitas penempatan dan penghapusan dot.
3. Sangat powerful untuk pemilihan komponen dan pemberian properties-nya
4. Mendukung untuk perancangan berbagai jenis bus dan komponen-komponen pin, port, modul dan jalur.
5. Memliki fasilitas report terhadap kesalahan-kesalahan perancangan dan simulasi elektrik.
5. Mendukung fasilitas interkoneksi dengan program pembuat PCB-ARES
6. Memiliki fasilitas untuk menambahkan package dari komponen yang belum didukung

jika ingin mencobanya, pertama harus mempunyai/terinstall software tersebut jika belum mempunyai software tersebut anda bisa mengunduhnya di situsnya


Jika ingin lebih lengkap anda bisa mengunduh materi dari sumber llinknya
thanks, semoga bermanfaat :)

Senin, 27 Oktober 2014

Cara install MikroTik router OS di virtual (VMWare/ VirtualBox)

Morning bloggers, mumpung masih lama waktu ngantor saya so saya bikin deh tutorial buat kalian yang suka oprek MikroTik.
tapi di sini saya buat tanpa MikroTik Routerboardnya hanya MikroTik RouterOS nya saja, jadi yang engga punya atau belum punya MikroTikRB nya jangan ngeluh ya so masih bisa kok ngelab. :D
oke langsung aja ya;
1. install dulu vmware atau vbox nya (disini saya pake vmware) jika belum ada bisa kunjungi situsnya
2. kemudian download RouterOS nya di sini sekalian download winboxnya ya(bagi yang belum ada)
3. setelah download, buka vmware
4. lalu create new virtual machine, dan browse masukan RouterOS yang telah di download
5. setelah itu pilih other, dan next kemudian start
6. kemudian muncul mode CLI, setelah muncul anda ketik a lalu tekan i dan tekan yes dan yes tunggu sampai reboot
7. setelah reboot, masukan user admin dan password dan enter
8. kemudian coba jalankan winbox dan masukan ip/ mac address yang terdeteksi lalu login

Jika penjelasan di atas kurang jelas, maka bisa dilihat video tutorialnya di bawah ini:

Note:
- kekurangan RouterOS di jalankan lewat virtual ini tidak bisa menggunakan fasilitas wireless
- jika belum mempunyai crack vmwarenya, silahkan download Disini
thanks, semoga bermanfaat.

How restore lilo after install windows

Good afternoon bloggers, i have some tutorial but don't familiar to hearing
if you dualboot Slackware with windows and reinstall windows automatically lilo nothing on Slackware, but now restore like originally :)
okay, before restore lilo you must have 3:
1. USB Flashdisk min. 4GB
2. software booting or commonly called unetbootin, usb creator etc. #recommend use unetbootin
3. iso slackware operating system

and then create boot live slackware dvd on usb flashdisk with unetbootin, after create;
1. login with root on slackware
2. check your partition with fdisk -l or cfdisk whatever you want :) #there my partition slackware on partition /dev/sda3 so adjust to your partiotion
3. and mount # mount /dev/sda3 /mnt
4. # mount -o bind /dev /mnt/dev
6. # mount -t proc none /mnt/proc
7. # chroot /mnt
8. # /sbin/lilo 9. # reboot

now see your lilo has restored, CMIIW.
thanks, my usefull

Sabtu, 11 Oktober 2014

Run Winbox on Slackware

Morning Bloggers :)
i have a little some tutorial, but it's not strange in the ears of IT.
if you Slackware User you'll find confused for running winbox, if you work on network engineering :)
first step you must install packet depend on Slackware Machine
Download this packet so that build and install

and then Download your winbox on this:

after Donwload allow automatic updates and install wine mono, wine gecko
let's see my screenshot:

I use winbox version 2.2.18, thank's
may be usefull ;)

Senin, 29 September 2014

clear cache di Slackware

malem bloggers, saya mau share tutorial nih mumpung engga sibuk sibuk amat kegiatan hari ini.
kali ini saya akan share tentang bagaimana clear cache di slackware, agar file dari hasil instalasi software kalian tidak menumpuk di /tmp {default cache Slackware}
untuk pertama, buatlah sebuah file di /etc/rc.d/rc.local_shutdown.append
# touch /etc/rc.d/rc.local_shutdown.append

fungsi touch itu mirip seperti create new file (GUI version), tapi ini di dalam console/terminal
kedua, masukan sebuah script agar otomatis saat shutdown file hasil dari instalasi akan terhapus otomatis
# nano /etc/rc.d/rc.local_shutdown.append
"/usr/bin/find /tmp -mindepth 1 -maxdepth 1 -exec /bin/rm -rf {} +;"

ket: tanpa tanda kutip jika di copas
lalu beri hak akses, dengan:
# chmod +x /etc/rc.d/rc.local_shutdown.append

ATAU
bisa menggunakan script ini di mesin slackware sobat;
create dahulu sebuah file dengan nama:
# touch cleanstale.sh

lalu
# nano cleanstale.sh

dan masukan script ini
"#!/bin/sh
# Cleanup /tmp however, do not remove sockets for X

# No lost+found with reiserfs
find /tmp/lost+found -exec /bin/touch {} \;
find /tmp -type s -exec /bin/touch {} \;
find /tmp -type d -empty -mtime +37 -exec /bin/rmdir {} \;
find /tmp -type f -mtime +37 -exec rm -rf {} "

lalu seperti biasa beri hak akses, dengan:
# chmod +x cleanstale.sh

lalu tinggal running
atau bisa menggunakan bleachbit, jika ingin menggunakan bleachbit bisa unduh di slackbuilds.org
dan jika ingin mengganti versi bleachbit ke versi baru, silahkan lihat posting saya yang sebelumnya. thanks ;)

Sabtu, 27 September 2014

hal hal yang dilakukan setelah Install Slackware

selamat malam para bloggers :)
kali ini saya akan berbagi pengalaman instalasi Slackware linux, mungkin ini udah agak lama soalnya pasti Slackware User sudah pada tahu tentang ini. namun saya juga suka kelupaan, untuk menjaga ketidaklupaan maka saya posting aja deh biar engga lupa. :D
baik, kita mulai saja ya ;)
setelah instalasi, yang dilakukan pertama adalah:
  • konfigurasi repository yang ingin digunakan, ada 2 repository yaitu versi stable dan current
  • lalu setelah itu lakukan update, upgrade kecuali jika memilih versi current harus benar untuk mengupgradenya biar tidak pusing :D
  • Jika ingin login defaultnya menggunakan GUI seperti KDM, GDM, dll. cukup hanya edit baris perintah pada:
# nano /etc/inittab * lalu ganti pada: # Default runlevel. (Do not set to 0 or 6) id:3:initdefault: menjadi # Default runlevel. (Do not set to 0 or 6) id:4:initdefault:
setelah selesai, reboot sistem anda setelah reboot akan muncul login GUI Slackware dengan KDM(punya saya) lalu setelah itu, ketika anda membuka konsole/terminal di slackware kalian juga akan menghadapi masalah user@hostname dikarenakan di slackware nama "user@host" defaultnya adalah "bash". untuk menggantinya anda cukup buka konsole masuk ke menu settings lalu lihat di kolom command defaultnya hanya "/bin/bash" dan tambahkan menjadi "/bin/bash -l" setelah itu apply dan ok, tutup konsole lalu buka lagi. nah hal yang paling mengejutkan lagi adalah, ketika hendak ingin mengupdate/upgrade/install/remove dll lewat hak akses user biasa/normal aplikasi sudo nya tidak akan berfungsi. padahal default slackware sudah terinstall aplikasi sudo untuk mengakses dengan user normal, cara agar dapat digunakannya adalah;
edit di /etc/sudoers dengan cara: # nano /etc/sudoers lalu cari teks di bawah ## User privilege specification ## root ALL=(ALL) ALL richard ALL=(ALL) ALL
  • kemudian tambahkan script di bawah file /etc/sudoers
sperti di bawah ini:
Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/$sbin:/bin"

selesai, tinggal anda gunakan ;)
mungkin sampai segitu dulu ya, soalnya saya udah mulai ngantuk berat nih.
Semoga bermanfaat ilmunya, terimakasih :)

Senin, 22 September 2014

[UPDATE] Rebuild Bleachbit on SlackBuild #Slackware

do you know bleacbit? a little explanation for me, bleachbit is software for cache cleaner like ccleaner on Windows and Clean Master on Android.
a slackware user become as from, i installed bleachbit on Slackware. but i see bleachbit not update, whereas bleachbit has updated to version 1.4 on SlackBuild has still 1.2 version. where the maintained? :)
i did not make this ;)
okay if you Slackware User and use bleachbit for cache cleaner, download source code

after download, put bleachbit-x.x.tar.bz2 to directory where bleachbit.SlackBuild save
and then edit bleachbit.SlackBuild, change version 1.2 to 1.4
"PRGNAM=bleachbit
VERSION=${VERSION:-1.4}
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}"


and give permission file bleachbit.SlackBuild then build :)
# chmod +x bleachbit-x.x.tar.bz2 && ./bleachbit-x.x.tar.bz2

and then upgrade with this command
# upgradepkg --install-new /tmp/bleachbit-x.x-noarch-1_SBo.tgz

you'll now have new bleachbit version :)


CMIIW :)

Install firefox in Kali Linux (in English)

night bloggers, this time i'll share tutorial install firefox in Kali Linux.
this tutorial is actually a long time ago, than in the store are not shared pity. knowledge a science decent helpfull for read, okay let's go :D
first remove iceweasel on your kali linux
# apt-get remove iceweasel

then put repository to /apt/sources.list
# echo -e "\ndeb http://downloads.sourceforge.net/project/ubuntuzilla/mozilla/apt all main" | tee -a /etc/apt/sources.list > /dev/null

then do a command like following:
# apt-key adv --recv-keys --keyserver keyserver.ubuntu.com C1289A29

after that, update your repository
# apt-get update

and then install like this command
# apt-get install firefox-mozilla-build



maybe helpfull ;)


source:kali linux

install firefox di kali linux

malem bloggers, kali ini saya akan share bagaimana install firefox di kali linux.
sebenarnya tutorial ini sudah lama sekali, daripada di simpan engga di share kan sayang. lumayan ilmunya bermanfaat untuk pembaca, oke langsung aja ;)
pertama remove/ hapus dulu package/ aplikasi iceweasel di kali linux anda
# apt-get remove iceweasel

kemudian masukan repository ke /apt/sources.list
# echo -e "\ndeb http://downloads.sourceforge.net/project/ubuntuzilla/mozilla/apt all main" | tee -a /etc/apt/sources.list > /dev/null

lalu lakukan perintah seperti di bawah ini:
# apt-key adv --recv-keys --keyserver keyserver.ubuntu.com C1289A29

setelah itu, anda update repository
# apt-get update

kemudian lakukan perintah instalasi software firefox
# apt-get install firefox-mozilla-build



semoga bermanfaat ;)


source:kali linux

Minggu, 21 September 2014

KDE 4 and 5 on Slackware Current has updated

earlier version of kde 4.14.0 and kde 5.0.2 and now has release new kde version to 4.14.1 and kde 5.0.2 to 5.2.0, by source nothing has changed but little change kde-workspace, kde-activities etc.
Where to find Slackware packages for KDE ?

Download locations are listed below.

You will find the KDE 4.14.1 sources in ./source/4.14.1/ and packages in /current/4.14.1/ subdirectories, whereas KDE 5 (Frameworks 5 and Plasma 5) sources can be downloaded from ./source/5/ and packages from /current/5/ .

Note that I have symlinks in place (useful for users of a package manager and running slackware-current) so that ./current/latest/ will always point to the latest stable KDE release, and ./current/testing/ will always point to the most recent testing release (currently that’s Frameworks 5 and Plasma 5).

Perhaps you noticed the directory name for KDE5 is “5″ and not “5.0.2″ or “5.2.0″. I decided to treat KDE5 as a “rolling release” and in future will probably update parts of it. For instance, when a new Frameworks 5 is released, I will only update the sources in ./source/5/kde/src/frameworks/ and the packages in ./current/5/*/kde/frameworks/ . The toplevel directory name will stay at “5″.

Using a mirror is preferred because you get more bandwidth from a mirror and it’s friendlier to the owners of the master server!

http://alien.slackbook.org/ktown/ (the master repository), rsync URI: rsync://alien.slackbook.org/alien/ktown/
http://taper.alienbase.nl/mirrors/alien-kde/ (my fast US mirror), rsync URI: rsync://taper.alienbase.nl/mirrors/alien-kde/
http://repo.ukdw.ac.id/alien-kde/ (willysr’s Indonesian mirror), rsync URI: rsync://repo.ukdw.ac.id/alien-kde/
http://slackware.org.uk/people/alien-kde/ (fast UK based mirror, run by Darren Austin), rsync URI: rsync://slackware.org.uk/people/alien-kde/
dont't forget read file README for kde 5 and README for kde 4.


thanks :)



thanks to:
Willy Sudiarto Rahardjo
Eric Hameleers

Install CMS Drupal On Slackware Linux

Night all :)
hmm for this time now i share installing CMS Drupal on Slackware Linux.
previous post my article, do you know CMS Drupal? answer CMS Drupal is open source software maintained and developed by a community of 630,000+ users and developers. It's distributed under the terms of the GNU General Public License (or "GPL"), which means anyone is free to download it and share it with others. This open development model means that people are constantly working to make sure Drupal is a cutting-edge platform that supports the latest technologies that the Web has to offer. The Drupal project's principles encourage modularity, standards, collaboration, ease-of-use, and more.
the history about drupal: Dries Buytaert began the Drupal software as a message board in 1999. Within a year or so, more people became interested using and contributing to Drupal, so the project was made open source. Drupal.org came online in 2001, and the Drupal community gained momentum in 2005 with several code sprints and conferences. Read more about the full history of Drupal and Druplicon.
So you wanna choose ;)
first, download your CMS Drupal on site
after download extract this file, and move to directory /var/www/htdocs
# tar -zxvf drupal-x.x.tar.gz && mv drupal /var/www/htdocs

after put to above directory, now create configuration drupal on your directory
# cp sites/default/default.settings.php sites/default/settings.php

and then give premission access or rewritable
# chmod a+w sites/default/settings.php && chmod a+w sites/default

don't forget give permission on primary drupal directory
# chmod a+w /var/www/htdocs/drupal-x.x

now create drupal database
# mysql -u username -p (login to your mysql or mariaDB)

after login, at the MySQL prompt :

# GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, INDEX, ALTER, CREATE TEMPORARY TABLES, LOCK TABLES ON databasename.* TO 'username'@'localhost' IDENTIFIED BY 'password';



Where:

'databasename' is the name of your database
'username' is the username of your MySQL account
'localhost' is the server name used to access MySQL
'password' is the password required for that username

If successful, MySQL will reply with:
Query OK, 0 rows affected

Run the installation script

You are now ready to run the installation script. Point your browser to the base URL of your website (e.g. http://www.example.com, http://www.example.com/drupal or http://localhost/drupal).

The installation wizard will guide you through several screens to set up the database, add the first user account, and provide basic website settings. Follow the wizard to finalize the installation and start working with your Drupal website.
may be useful, thanks ;)



source:Drupal

Minggu, 14 September 2014

can't upload plugin or theme cms wordpress on localhost #Linux

Okay now i tell a little history, after installed wordpress on localhost i can't upload this plugin and theme.
solution you must rewritable on your where directory wordpress installed
# chmod -R 777 /var/www/htdocs/wordpress

and now you must edit file on wp-config.php and add to under line
define('FS_METHOD', 'direct');

may be useful :)

install CMS Wordpress On Slackware Linux

hello every body, i would like to tell us a bit.
from first installed wordpress cms in my laptop, I use the operating system Slackware Linux.
i was inspired for make a tutorial in my blog :)
okay first you must download Wordpress, after downloaded extract zip file to your path directory e.g: /var/www/htdocs/ (SLackware)
# unzip -d wordpress-X.X.X-XX_XX.zip /var/www/htdocs

after extracted, you must run or enable service in Slackware like apache and mysql
# /etc/rc.d/rc.httpd enable and # /etc/rc.d/rc.httpd start

and you found 127.0.0.1 NameServer could not reliable determine the server's fully qualified domain name, to solved add ServerName in under line on httpd.conf file

SSLRandomSeed startup builtin
SSLRandomSeed connect builtin

#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#
#BrowserMatch "MSIE 10.0;" bad_DNT
#

#
#RequestHeader unset DNT env=bad_DNT
#



# Uncomment the following line to enable PHP:
#
Include /etc/httpd/mod_php.conf
Include /etc/httpd/phpMyAdmin.conf

# Uncomment the following lines (and mod_dav above) to enable svn support:
#
#LoadModule dav_svn_module lib64/httpd/modules/mod_dav_svn.so
#LoadModule authz_svn_module lib64/httpd/modules/mod_authz_svn.so

ServerName localhost


and then restart service httpd on your machine
# /etc/rc.d/rc.httpd restart

now you run mysql service
# /etc/rc.d/rc.mysqld enable and # /etc/rc.d/rc.mysqld start

after running, this simple test your browser with localhost if works this mean httpd is running
okay, you go to phpmyadmin on your browser
localhost/phpmyadmin

after show phpmyadmin, you logged in and create database name up to you
after create, now you access localhost/wordpress in there you follow this step for installing wordpress
have fun, arief :)

Rabu, 10 September 2014

Update: kernel, security seamonkey

After update kernel on 3.14.17 on Slackware-Current and update firefox with thunderbird, The Slackware has update kernel and security seamonkey. On kernel has update to 3.14.18, if you want update/upgrade on Slackware-Current:
# slackpkg update and # slackpkg upgrade-all

Install compiz on Kali Linux/debian wheezy on 32 bit



exactly, this article has too long i keep :)
but unfortunately that dumped, you certainly known his post ;)
okay, first i tell why post article install compiz on kali linux? this answer; but kali linux based on debian wheezy, while debian wheezy not supplied compiz.
the begin i used kali linux, i got confused to install compiz on kali linux and until can installed.
let's see:
  • install gdebi on your kali linux/debian wheezy

# apt-get install gdebi

  • Download necessary packages:

  • python-compizconfig_0.8.4-2_i386.deb

# wget http://ftp.us.debian.org/debian/pool/main/c/compizconfig-python/python-compizconfig_0.8.4-2_i386.deb

  • compiz-gtk_0.8.4-4_i386.deb

# wget http://ftp.us.debian.org/debian/pool/main/c/compiz/compiz-gtk_0.8.4-4_i386.deb

  • libgnome-desktop-2-17_2.30.2-2_i386.deb

# wget mirror.pnl.gov/ubuntu//pool/main/g/gnome-desktop/libgnome-desktop-2-17_2.30.2-0ubuntu1_i386.deb

  • . libgnome-window-settings1_2.30.0-0ubuntu4_i386.deb

# wget mirror.pnl.gov/ubuntu//pool/main/g/gnome-control-center/libgnome-window-settings1_2.30.0-0ubuntu4_i386.deb

  • Create the following directories:

# mkdir /(user)/rep

  • for example i use root user

# mkdir /root/rep

  • and then

# mkdir /root/rep/compiz-gtk_0.8.4-4_i386/

  • Extract the package compiz-gtk_0.8.4-4_i386 into the created directory

# dpkg-deb -x compiz-gtk_0.8.4-4_i386.deb /root/rep/compiz-gtk_0.8.4-4_i386/

# dpkg-deb -e compiz-gtk_0.8.4-4_i386.deb /root/rep/compiz-gtk_0.8.4-4_i386/DEBIAN/

  • and then edit the control file

# leafpad /root/rep/compiz-gtk_0.8.4-4_i386/DEBIAN/control
* Find in text libmetacity-private0 (>= 1:2.26.0) delete and replace with libmetacity-private0a
* Save and exit
* Edit pack

  • extract yet

# dpkg-deb -b /root/rep/compiz-gtk_0.8.4-4_i386 /root/rep/compiz-gtk_0.8.4-4_i386.deb

  • Created directory

# mkdir /root/rep/python-compizconfig_0.8.4-2_i386/

  • Extract the package python-compizconfig_0.8.4-2_i386 into the created directory

# dpkg-deb -x python-compizconfig_0.8.4-2_i386.deb /root/rep/python-compizconfig_0.8.4-2_i386/

# dpkg-deb -e python-compizconfig_0.8.4-2_i386.deb /root/rep/python-compizconfig_0.8.4-2_i386//DEBIAN/

  • Edit the control file

# leafpad /root/rep/python-compizconfig_0.8.4-2_i386//DEBIAN/control
* Find in text python (<< 2.7) delete and replace with python (<< 3.0)
* Save and exit
  • Modify python-compizconfig.public
# leafpad /root/rep/python-compizconfig_0.8.4-2_i386/usr/share/python-support/python-compizconfig.public
Delete all copy and paste this text
pyversions=2.5,2.6,2.7
/usr/lib/pyshared/python2.5/compizconfig.so
/usr/lib/pyshared/python2.6/compizconfig.so
/usr/lib/pyshared/python2.7/compizconfig.so
  • Create directory python2.7 in /root/rep/python-compizconfig_0.8.4-2_i386/usr/lib/pyshared
# mkdir /root/rep/python-compizconfig_0.8.4-2_i386/usr/lib/pyshared/python2.7
  • Copy compizconfig.so python2.6 in /root/rep/python-compizconfig_0.8.4-2_i386/usr/lib/pyshared/python2.7
# cp /root/rep/python-compizconfig_0.8.4-2_i386/usr/lib/pyshared/python2.6/compizconfig.so /root/rep/python-compizconfig_0.8.4-2_i386/usr/lib/pyshared/python2.7
  • Edit pack
# dpkg-deb -b /root/rep/python-compizconfig_0.8.4-2_i386 /root/rep/python-compizconfig_0.8.4-2_i386.deb
  • Install the dependencies that are needed
# gdebi /root/libgnome-desktop-2-17_2.30.2-0ubuntu1_i386.deb
# gdebi /root/libgnome-window-settings1_2.30.0-0ubuntu4_i386.deb
  • Edit your sources.list adding deb http://ftp.us.debian.org/debian squeeze main
# leafpad /etc/apt/sources.list
* adjust to each your favorite repository, but don't forget follow above instruction
* My Sources list:
# 
deb http://http.kali.org/ /kali main contrib non-free
deb http://http.kali.org/ /wheezy main contrib non-free
deb http://http.kali.org/kali kali-dev main contrib non-free
deb http://http.kali.org/kali kali-dev main/debian-installer
deb-src http://http.kali.org/kali kali-dev main contrib non-free
deb http://http.kali.org/kali kali main contrib non-free
deb http://http.kali.org/kali kali main/debian-installer
deb-src http://http.kali.org/kali kali main contrib non-free
deb http://security.kali.org/kali-security kali/updates main contrib non-free
deb-src http://security.kali.org/kali-security kali/updates main contrib non-free
deb http://ftp.us.debian.org/debian squeeze main
* Save and exit
  • Update System
# apt-get update
  • Install Compiz
# apt-get install libdecoration0 libdecoration0-dev compiz-core libcompizconfig0 libcompizconfig-dev compizconfig-backend-gconf compiz-fusion-bcop compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-fusion-plugins-unsupported compiz-plugins
  • Install compiz-gtk_0.8.4-4_i386 previously edited
# gdebi /root/rep/compiz-gtk_0.8.4-4_i386.deb
  • Install python-compizconfig_0.8.4-2_i386.deb
# gdebi /root/rep/python-compizconfig_0.8.4-2_i386.deb
  • Install other dependencies
# apt-get install compiz-gnome compizconfig-settings-manager compiz-dev compiz
  • Add compize to autostart, and add compize --replace
  • Reboot
* After restarting, Edit your sources.list remove deb http://ftp.it.debian.org/debian squeeze main
# leafpad /etc/apt/sources.list
* save and exit
* and the update your system with #apt-get update
  • Optional to be performed only if the launcher does not work
* in case of failure of the launcher reinstall python-compizconfig_0.8.4-2_i386.deb
# gdebi /root/rep/python-compizconfig_0.8.4-2_i386.deb
* if the problem is not resolved install kernel headers
#apt-get install -y linux-headers-$(uname -r)
and reinstall python-compizconfig_0.8.4-2_i386.deb
# gdebi /root/rep/python-compizconfig_0.8.4-2_i386.deb
* if it does not work unformatted simply uninstall the packages
Have fun, Arief I hope work, CMIIW ;) source:kali/debian

Rabu, 27 Agustus 2014

Fix Wireshark as root

Pagi semua :D, saya mau share nih tentang wireshark yang di jalankan di atas root. biasanya sih dalam OS hacking, karena wireshark bisa di jalankan dalam user normal.
jika menggunakan OS hacking, pasti akan menemukan satu user yaitu super user atau yang di sebut root. karena OS tersebut sengaja di usung untuk memudahkan, mengganti dll (menurut saya) ;)
lalu ketika anda ingin membuka wireshark di user root, anda akan menemukan wireshark as root bla bla bla ........ dst gitu. :D
nah saya juga sempat di buat bingung dengan wireshark ini, lah gimana cara memperbaikinya. tapi saya nemu dari suatu sumber tapi sumbernya saya lupa lagi karena artikel ini sudah lama saya save di catatan saya dan tidak ada sumbernya, mohon maaf. :(
tanpa basa basi langsung aja deh :)
click for show/hide:
buka terminal/konsole lalu ketikan: #nano /etc/wireshark/init.lua

Nah setelah itu lalu anda masukan script di bawah ini:
click for show/hide:

-- init.lua
--
-- initialize wireshark's lua
--
-- This file is going to be executed before any other lua script.
-- It can be used to load libraries, disable functions and more.
--
-- $Id: template-init.lua 49730 2013-06-03 22:03:32Z etxrab $
--
-- Wireshark - Network traffic analyzer
-- By Gerald Combs
-- Copyright 1998 Gerald Combs
--
-- This program is free software; you can redistribute it and/or
-- modify it under the terms of the GNU General Public License
-- as published by the Free Software Foundation; either version 2
-- of the License, or (at your option) any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

-- Set disable_lua to true to disable Lua support.
disable_lua = false
if disable_lua then
return
end

-- If set and we are running with special privileges this setting
-- tells whether scripts other than this one are to be run.
run_user_scripts_when_superuser = true


-- disable potentialy harmful lua functions when running superuser
-- commented out the instructions here as BackTrack is meant to be run
-- as root. -- dookie
if running_superuser then
-- local disabled_lib = {}
-- setmetatable(disabled_lib,{ __index = function() error("this package has been disabled") end } );

-- dofile = function() error("dofile has been disabled") end
-- loadfile = function() error("loadfile has been disabled") end
-- loadlib = function() error("loadlib has been disabled") end
-- require = function() error("require has been disabled") end
-- os = disabled_lib
-- io = disabled_lib
-- file = disabled_lib
end

-- to avoid output to stdout which can cause problems lua's print ()
-- has been suppresed so that it yields an error.
-- have print() call info() instead.
if gui_enabled() then
print = info
end

-- -- Wiretap encapsulations XXX
wtap_encaps = {
["UNKNOWN"] = 0,
["ETHERNET"] = 1,
["TOKEN_RING"] = 2,
["SLIP"] = 3,
["PPP"] = 4,
["FDDI"] = 5,
["FDDI_BITSWAPPED"] = 6,
["RAW_IP"] = 7,
["ARCNET"] = 8,
["ARCNET_LINUX"] = 9,
["ATM_RFC1483"] = 10,
["LINUX_ATM_CLIP"] = 11,
["LAPB"] = 12,
["ATM_PDUS"] = 13,
["ATM_PDUS_UNTRUNCATED"] = 14,
["NULL"] = 15,
["ASCEND"] = 16,
["ISDN"] = 17,
["IP_OVER_FC"] = 18,
["PPP_WITH_PHDR"] = 19,
["IEEE_802_11"] = 20,
["IEEE_802_11_PRISM"] = 21,
["IEEE_802_11_WITH_RADIO"] = 22,
["IEEE_802_11_RADIOTAP"] = 23,
["IEEE_802_11_AVS"] = 24,
["SLL"] = 25,
["FRELAY"] = 26,
["FRELAY_WITH_PHDR"] = 27,
["CHDLC"] = 28,
["CISCO_IOS"] = 29,
["LOCALTALK"] = 30,
["OLD_PFLOG"] = 31,
["HHDLC"] = 32,
["DOCSIS"] = 33,
["COSINE"] = 34,
["WFLEET_HDLC"] = 35,
["SDLC"] = 36,
["TZSP"] = 37,
["ENC"] = 38,
["PFLOG"] = 39,
["CHDLC_WITH_PHDR"] = 40,
["BLUETOOTH_H4"] = 41,
["MTP2"] = 42,
["MTP3"] = 43,
["IRDA"] = 44,
["USER0"] = 45,
["USER1"] = 46,
["USER2"] = 47,
["USER3"] = 48,
["USER4"] = 49,
["USER5"] = 50,
["USER6"] = 51,
["USER7"] = 52,
["USER8"] = 53,
["USER9"] = 54,
["USER10"] = 55,
["USER11"] = 56,
["USER12"] = 57,
["USER13"] = 58,
["USER14"] = 59,
["USER15"] = 60,
["SYMANTEC"] = 61,
["APPLE_IP_OVER_IEEE1394"] = 62,
["BACNET_MS_TP"] = 63,
["NETTL_RAW_ICMP"] = 64,
["NETTL_RAW_ICMPV6"] = 65,
["GPRS_LLC"] = 66,
["JUNIPER_ATM1"] = 67,
["JUNIPER_ATM2"] = 68,
["REDBACK"] = 69,
["NETTL_RAW_IP"] = 70,
["NETTL_ETHERNET"] = 71,
["NETTL_TOKEN_RING"] = 72,
["NETTL_FDDI"] = 73,
["NETTL_UNKNOWN"] = 74,
["MTP2_WITH_PHDR"] = 75,
["JUNIPER_PPPOE"] = 76,
["GCOM_TIE1"] = 77,
["GCOM_SERIAL"] = 78,
["NETTL_X25"] = 79,
["K12"] = 80,
["JUNIPER_MLPPP"] = 81,
["JUNIPER_MLFR"] = 82,
["JUNIPER_ETHER"] = 83,
["JUNIPER_PPP"] = 84,
["JUNIPER_FRELAY"] = 85,
["JUNIPER_CHDLC"] = 86,
["JUNIPER_GGSN"] = 87,
["LINUX_LAPD"] = 88,
["CATAPULT_DCT2000"] = 89,
["BER"] = 90,
["JUNIPER_VP"] = 91,
["USB"] = 92,
["IEEE802_16_MAC_CPS"] = 93,
["NETTL_RAW_TELNET"] = 94,
["USB_LINUX"] = 95,
["MPEG"] = 96,
["PPI"] = 97,
["ERF"] = 98,
["BLUETOOTH_H4_WITH_PHDR"] = 99,
["SITA"] = 100,
["SCCP"] = 101,
["BLUETOOTH_HCI"] = 102,
["IPMB"] = 103,
["IEEE802_15_4"] = 104,
["X2E_XORAYA"] = 105,
["FLEXRAY"] = 106,
["LIN"] = 107,
["MOST"] = 108,
["CAN20B"] = 109,
["LAYER1_EVENT"] = 110,
["X2E_SERIAL"] = 111,
["I2C"] = 112,
["IEEE802_15_4_NONASK_PHY"] = 113,
["TNEF"] = 114,
["USB_LINUX_MMAPPED"] = 115,
["GSM_UM"] = 116,
["DPNSS"] = 117,
["PACKETLOGGER"] = 118,
["NSTRACE_1_0"] = 119,
["NSTRACE_2_0"] = 120,
["FIBRE_CHANNEL_FC2"] = 121,
["FIBRE_CHANNEL_FC2_WITH_FRAME_DELIMS"] = 122,
["JPEG_JFIF"] = 123,
["IPNET"] = 124,
["SOCKETCAN"] = 125, ["IEEE_802_11_NETMON"] = 126,
["IEEE802_15_4_NOFCS"] = 127,
["RAW_IPFIX"] = 128,
["RAW_IP4"] = 129,
["RAW_IP6"] = 130,
["LAPD"] = 131,
["DVBCI"] = 132,
["MUX27010"] = 133,
["MIME"] = 134,
["NETANALYZER"] = 135,
["NETANALYZER_TRANSPARENT"] = 136,
["IP_OVER_IB"] = 137,
["MPEG_2_TS"] = 138,
["PPP_ETHER"] = 139,
["NFC_LLCP"] = 140,
["NFLOG"] = 141,
["V5_EF"] = 142,
["BACNET_MS_TP_WITH_PHDR"] = 143,
["IXVERIWAVE"] = 144,
["IEEE_802_11_AIROPEEK"] = 145,
["SDH"] = 146,
["DBUS"] = 147,
["AX25_KISS"] = 148,
["AX25"] = 149,
["SCTP"] = 150,
["INFINIBAND"] = 151,
["JUNIPER_SVCS"] = 152,
["USBPCAP"] = 153
}
wtap = wtap_encaps -- for bw compatibility


-- -- Wiretap file types
wtap_filetypes = {
["UNKNOWN"] = 0,
["PCAP"] = 1,
["PCAPNG"] = 2,
["PCAP_NSEC"] = 3,
["PCAP_AIX"] = 4,
["PCAP_SS991029"] = 5,
["PCAP_NOKIA"] = 6,
["PCAP_SS990417"] = 7,
["PCAP_SS990915"] = 8,
["5VIEWS"] = 9,
["IPTRACE_1_0"] = 10,
["IPTRACE_2_0"] = 11,
["BER"] = 12,
["HCIDUMP"] = 13,
["CATAPULT_DCT2000"] = 14,
["NETXRAY_OLD"] = 15,
["NETXRAY_1_0"] = 16,
["COSINE"] = 17,
["CSIDS"] = 18,
["DBS_ETHERWATCH"] = 19,
["ERF"] = 20,
["EYESDN"] = 21,
["NETTL"] = 22,
["ISERIES"] = 23,
["ISERIES_UNICODE"] = 24,
["I4BTRACE"] = 25,
["ASCEND"] = 26,
["NGSNIFFER_UNCOMPRESSED"] = 29,
["NGSNIFFER_COMPRESSED"] = 30,
["NETXRAY_1_1"] = 31,
["NETWORK_INSTRUMENTS"] = 33,
["LANALYZER"] = 34,
["PPPDUMP"] = 35,
["RADCOM"] = 36,
["SNOOP"] = 37,
["SHOMITI"] = 38,
["VMS"] = 39,
["K12"] = 40,
["TOSHIBA"] = 41,
["VISUAL_NETWORKS"] = 42,
["PEEKCLASSIC_V56"] = 43,
["PEEKCLASSIC_V7"] = 44,
["PEEKTAGGED"] = 45,
["MPEG"] = 46,
["K12TEXT"] = 47,
["NETSCREEN"] = 48,
["COMMVIEW"] = 49,
["BTSNOOP"] = 50,
["TNEF"] = 51,
["DCT3TRACE"] = 52,
["PACKETLOGGER"] = 53,
["DAINTREE_SNA"] = 54,
["NETSCALER_1_0"] = 55,
["NETSCALER_2_0"] = 56,
["JPEG_JFIF"] = 57,
["IPFIX"] = 58,
["MIME"] = 59,
["AETHRA"] = 60,
["MPEG_2_TS"] = 61,
["VWR_80211"] = 62,
["VWR_ETH"] = 63,
["CAMINS"] = 64,
["TSPREC_SEC"] = 0,
["TSPREC_DSEC"] = 1,
["TSPREC_CSEC"] = 2,
["TSPREC_MSEC"] = 3,
["TSPREC_USEC"] = 6,
["TSPREC_NSEC"] = 9
}


-- -- Field Types
ftypes = {
["NONE"] = 0,
["PROTOCOL"] = 1,
["BOOLEAN"] = 2,
["UINT8"] = 3,
["UINT16"] = 4,
["UINT24"] = 5,
["UINT32"] = 6,
["UINT64"] = 7,
["INT8"] = 8,
["INT16"] = 9,
["INT24"] = 10,
["INT32"] = 11,
["INT64"] = 12,
["FLOAT"] = 13,
["DOUBLE"] = 14,
["ABSOLUTE_TIME"] = 15,
["RELATIVE_TIME"] = 16,
["STRING"] = 17,
["STRINGZ"] = 18,
["UINT_STRING"] = 19,
["ETHER"] = 20,
["BYTES"] = 21,
["UINT_BYTES"] = 22,
["IPv4"] = 23,
["IPv6"] = 24,
["IPXNET"] = 25,
["FRAMENUM"] = 26,
["PCRE"] = 27,
["GUID"] = 28,
["OID"] = 29,
["EUI64"] = 30,
["AX25"] = 31
}


-- -- Display Bases
base = {
["NONE"] = 0,
["DEC"] = 1,
["HEX"] = 2,
["OCT"] = 3,
["DEC_HEX"] = 4,
["HEX_DEC"] = 5,
}



-- -- Encodings
ENC_BIG_ENDIAN = 0
ENC_LITTLE_ENDIAN = 2147483648
ENC_TIME_TIMESPEC = 0
ENC_TIME_NTP = 2
ENC_CHARENCODING_MASK = 2147483646
ENC_ASCII = 0
ENC_UTF_8 = 2
ENC_UTF_16 = 4
ENC_UCS_2 = 6
ENC_EBCDIC = 8
ENC_NA = 0




-- -- Expert flags and facilities
PI_SEVERITY_MASK = 15728640
PI_COMMENT = 1048576
PI_CHAT = 2097152
PI_NOTE = 4194304
PI_WARN = 6291456
PI_ERROR = 8388608
PI_GROUP_MASK = 4278190080
PI_CHECKSUM = 16777216
PI_SEQUENCE = 33554432
PI_RESPONSE_CODE = 50331648
PI_REQUEST_CODE = 67108864
PI_UNDECODED = 83886080
PI_REASSEMBLE = 100663296
PI_MALFORMED = 117440512
PI_DEBUG = 134217728
PI_PROTOCOL = 150994944
PI_SECURITY = 167772160
PI_COMMENTS_GROUP = 184549376




-- -- menu groups for register_menu
MENU_ANALYZE_UNSORTED = 0
MENU_ANALYZE_CONVERSATION = 1
MENU_STAT_UNSORTED = 2
MENU_STAT_GENERIC = 3
MENU_STAT_CONVERSATION = 4
MENU_STAT_ENDPOINT = 5
MENU_STAT_RESPONSE = 6
MENU_STAT_TELEPHONY = 7
MENU_TOOLS_UNSORTED = 8


-- other useful constants
GUI_ENABLED = gui_enabled()
DATA_DIR = datafile_path()
USER_DIR = persconffile_path()

dofile(DATA_DIR.."console.lua")
--dofile(DATA_DIR.."dtd_gen.lua")
Have fun, Arief :)
CMIIW :)

Selasa, 26 Agustus 2014

Slackpkg Plus on Slackware

Slackpkg plus adalah plugin software 3rd party repositorynya Slackware, kalo dibilang agak mirip mirip si apt-getnya Debian dan Yumnya Red Hat :)
Jika tertarik anda bisa mencoba menginstallnya, klik link ini untuk mengunduhnya Slackfinder
untuk menambahkan repository silahkan anda baca file READMEnya, dan repositori yang tersedia di slackpkg:
click for show/hide:
Supported Repositories:
> Supports GPG
> slackpkgplus: http://slakfinder.org/slackpkg+/
> multilib: http://taper.alienbase.nl/mirrors/people/alien/multilib/{13.37,14.0,14.1,current}/
> alienbob: http://taper.alienbase.nl/mirrors/people/alien/sbrepos/{13.37,14.0,14.1,current}/{x86,x86_64}/
> ktown: http://taper.alienbase.nl/mirrors/alien-kde/{13.37,14.0,14.1,current}/latest/{x86,x86_64}/
> restricted: http://taper.alienbase.nl/mirrors/people/alien/restricted_sbrepos/{13.37,14.0,14.1,current}/{x86,x86_64}/
> slacky: http://repository.slacky.eu/slackware{,64}-{13.37,14.0,14.1}/
> mled: http://www.microlinux.fr/slackware/MLED-{14.0,14.1}-{32,64}bit/
> mles: http://www.microlinux.fr/slackware/MLES-{14.0,14.1}-{32,64}bit/
> msb: http://slackware.org.uk/msb/{14.0,14.1}/{1.6,1.8}/{x86,x86_64}/
> slackers: http://www.slackers.it/repository/
> slacke17: http://ngc891.blogdns.net/pub/slacke17/slackware{,64,arm}-{14.0,14.1}/
> studioware: http://studioware.org/files/packages/slackware{,64}-{13.37,14.0,14.1}/
> slackonly: http://slackonly.com/pub/packages/14.1-x86_64/
>
> Does NOT support GPG
> salixos(*): http://download.salixos.org/{i486,x86_64}/{13.37,14.0,14.1}/
> salixext: http://people.salixos.org/ralvex/repository/x86_64/{14.0,14.1}/
> rlworkman(*): http://rlworkman.net/pkgs/{13.37,14.0,14.1}/
> slackel: http://www.slackel.gr/repo/{i486,x86_64}/current/
(*) salixos and rlworkman partially supports GPG. These repositories contains the .asc file
for CHECKSUMS.md5, so the 'update' process works with CHECKGPG=on and repository authenticity is guaranteed.
Unfortunately the single packages do not include the related .asc file, so you must install the packages with 'slackpkg -checkgpg=off install ', but the authenticity is guaranteed by the md5 authenticity.

Jika ada yang ingin di tanyakan silahkan comment, karena kita saling berbagi dan sama sama belajar ;)
source: Slackfinder
Thank's, Have Fun Arief ;)

Install Steam on Slackware 64 bit[Stable,Current]

setelah saya baca - baca di pos artikelnya MR.Alien :), saya tertarik untuk membuat sebuah postingan di blog saya. :)
tapi saya lihat hanya untuk versi Slackware 32 bit saja tetapi di lihat lebih detail lagi ternyata bisa juga di install di Slackware 64 bit :)
langkah yang pertama harus anda install adalah:
  • Pertama anda install terlebih dahulu multilib(compat-32) nya agar compatible ketika kita akan menginstall software 32 bit
  • Setelah itu anda install dulu OpenAL versi 32 bit di mesin 64 bit anda
  • lalu anda install flash player plugins versi 32 bit di mesin Slackware 64 bit anda
  • Have Fun, Arief :)

Untuk Menginstall software di atas tersebut, silahkan klik link ini
OpenAL
flashplayer-plugin
Multilib
Nah di sana anda dapat menemukan sesuai dengan versi Slackware Anda
Thanks ;)

Source: Eric Hameleers

Replace lilo splash with wayan [Slackware]

hello slackers, tonight i share how replace lilo splash with wayan on Slackware. really i newbie Slackware User but i very enthusiastic to use Slackware :)
exactly i find this article on Slackblogs, sorry Mr. Willy i repost this article. :)
okay now i explain:
click for show/hide:
  • su (enter root password)
  • cp /usr/doc/lilo-23.2/sample/slack14.0.2012.bmp /boot
  • nano /etc/lilo.conf
  • Change this line
      • bitmap = /boot/slack.bmp
      • into
      • bitmap = /boot/slack14.0.2012.bmp
  • /sbin/lilo -v (make sure no errors)
  • reboot

you'll see nice lilo splash after reboot :)
source: slackblogs

Kamis, 24 Juli 2014

Update: httpd, kernel, mozilla, nano

slackware-current has new update namely httpd-2.4.10, kernel-generic, kernel-headers, kernel-huge, kernel-modules, kernel-sources to 3.14.13, and mozilla firefox, thunderbird to 31.0 and nano-2.3.6.
if you want update, you can typing on your keyboard "slackpkg update" and then "slackpkg upgrade-all"

Minggu, 20 Juli 2014

Fix chromium can't detect flash plugin [Slackware]

hello everybody all :D
hmm i want share my experience to Slackware User, before i'm not understand why chromium can't detect flash plugin!!!
was only must installed this chromium-pepperflash-plugin, with the completion this problem all to simple and easy :)
if you same installed chromium and can't find flash plugin, you just have to download this plugin for chromium
in this plugin:




thank's

Selasa, 17 Juni 2014

watch tv on Linux Slackware

hmm since there are no jobs, i want post tutorial for watch tv on Slackware Linux.
goodly for watch fifa world cup 2014, because on my parabola was block with satelite so can't watch fifa world cup 2014. Finally I use tv software for watch this.
for software/ application i use freetuxtv you can download this software on site with command :
click for show/hide:
$ wget https://freetuxtv.googlecode.com/files/freetuxtv-0.6.6.tar.gz

and extract file after download with command :
click for show/hide:
$ sudo tar -zxvf freetuxtv-0.6.6.tar.gz

after extract you run with this command, because slackware there is library like :
  • gcc
  • make
  • autoconf
  • automake
  • intltool
  • libtool
  • gettext
  • libgtk-3-dev
  • libdbus-glib-1-dev
  • libsqlite3-0
  • libsqlite3-dev
  • libcurl3
  • libcurl4-openssl-dev
  • libvlc-dev
  • libnotify-dev

click for show/hide:
$ sudo ./autogen.sh

and then configure ;
click for show/hide:
$ sudo ./configure --prefix=/usr/local

after configure you run ;
click for show/hide:
$ sudo make

and then install this file with command ;
click for show/hide:
$ sudo make install

Note: if i wrong please corrected and give me suggestion
Thanks :)
source :
click for show/hide:

Kamis, 12 Juni 2014

setting brightness all desktop environment on Linux

hello bloggers :) before i will explain a bit, what is desktop environment? Desktop environment is a graphical display of the user interface (Graphical User Interface (GUI)) are designed to facilitate users in accessing and using (configuration and modification) features in an operating system package. However, this (use GUI) does not mean that the user can access all the features of an operating system in which the use of the command line (command line) should still be used when the user wants to access is absolutely an operating system (full access).
Desktop environtment consists of icons, windows, toolbars, folders, wallpapers, shortcuts, and desktop widgets.
Desktop environtment also have drag and drop access and other functions that make it a more interactive desktop environment. tonight i wont share to setting brightness all desktop environment on Linux. desktop environment many variants, including :
click for show/hide:

- KDE

- GNOME

- XFCE

- LXDE

- Mate

- Cinnamon

and many variants window manager, if you don't know window manager use google search engine and search about article "what is window manager on Linux" :) *Kidding including window manager :
click for show/hide:

- Openbox

- blackbox

- awesome

- etc

okay let's start, my tutorial how setting brightness all DE on Linux :D i use vga driver intel, so if your vga nvidia or amd i'm not responsible for this happen :)
click for show/hide:
$ sudo touch /usr/share/X11/xorg.conf.d/20-intel.conf

after create file, edit your file and you will show blank file :D
click for show/hide:
$ sudo nano /usr/share/X11/xorg.cond.d/20-intel.conf

and then copy paste this config to your blank file
click for show/hide:

Section "Device"
Identifier "card0"
Driver "intel"
Option "AccelMethod" "sna"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection

and then you configure (must be root), if you use grub :
click for show/hide:
# update-grub

if you use lilo :
click for show/hide:

# lilo
or
# lilo -v

well done, if you have advice comment me or email me. because i'm still learning, sorry [OOT] :D